The hydraulic chuck of the modified CNC lathe should first understand the primary components and classification of the hydraulic chuck. The hydraulic chuck is mainly composed of the hydraulic chuck, the reverse cylinder and the hydraulic station. The chuck is divided into the hollow chuck and the medium-sized chuck. According to the specific processing conditions, the hollow chuck is more expensive than the medium-sized chuck.

In addition to the above-mentioned standard components, the manual chuck is also required to be a flange and a pull tube for the chuck and the reverse cylinder for connecting the chuck and the reverse cylinder, and the demand for the pull tube is based on the CNC lathe. The length of the spindle through hole and the length of the spindle are determined. After the flange and the pull tube are processed, the chuck and the reverse cylinder are connected, and the reverse cylinder is connected to the hydraulic station, and the demand is controlled by the numerical control system. Adding a system point plus relay to control the solenoid valve of the hydraulic station to complete programming automatic control;

Although the installed hydraulic chuck should be inspected and debugged, the hydraulic chuck can complete the normal clamping release. In addition, when the spindle rotates, the chuck will not be loosened, the pressure will be stable and there will be no oil leakage, and the hydraulic station will be long. When working, the oil temperature should not be higher than 50 degrees.

For more information about Shanghai Lathe Electromechanical Technology Co., Ltd. Shanghai lathe, Shanghai small CNC lathe, Shanghai CNC lathe, please contact Xiaobian.