The lathe lathe: Intuitively speaking, the movement of the tool in the process of moving the XZ axis; the movement of the heart: the spindle of the machining process moves in the Z axis, and the tool moves in the X axis; The processed products are processed by small-diameter products, which are as small as 1mm in diameter and as large as 38mm in diameter. Generally speaking, they will not exceed 38mm diameter products, mainly based on small-diameter products. In theory, the walking meter is It can process infinitely long products and can feed infinite times, but only the theoretical value, because the supporting peripheral equipment is not allowed, and the actual processing is not allowed;

The lathe lathe also needs to divide the red lathe lathe and the turret lathe. The diameter of the lathe lathe can be used to take care of both the heart meter and the turret lathe, and it is approved by the electronics and communication industries with the tool change speed and processing speed. The design concept of many manufacturers of lathes is considered by large through-holes, large diameters and processing lengths, and can be processed in parallel and single-piece clamping. This is not enough for the compass. Can be continuous feeding processing); Some people only say that it is a precision problem, I think it is too simple, because the determining factor of precision is related to the rigidity and stability of the machine tool, and more mainly in the process of processing, the organization of the process (spindle The main factors such as the speed, the feed rate, the use of the tool, the use of cutting oil, etc.). . . Of course, we must also consider the machine body factors produced by our own machine tool manufacturers.

For more information about Shanghai Lathe Electromechanical Technology Co., Ltd. Shanghai lathe, Shanghai small CNC lathe, Shanghai CNC lathe, please contact Xiaobian.