There are many kinds of cnc CNC lathes. Different machines have different operation methods. The following briefly introduces the startup process of CNC lathe operation:

1. Before starting the machine, you should do some safety check first, such as whether there is a workpiece on the chuck, whether the pallet is in a safe orientation, whether the wire is short-circuited or not.

2, check the end, open the machine's external power intake main gate, (the pneumatic device's open fan switch first inflates, after the end of the inflation, then do the next step to compare insurance) and then open the machine's internal power switch, (if Always open, it is best to preheat for half an hour) and then turn on the system power.

3. After the power supply is turned over, the first thing is to do the zero return operation and establish the machine coordinate system.

The first three are the preparations before the machine tool processing, the following is the step of the processing:

4. Prepare the processed parts blanks, knives, measuring things, things, etc.

5. Write the program according to the processing technology and enter the system. And run the program freely to see if there are any errors.

6, install the tool, and the knife.

7. Process according to the program.

8. The measurement size is measured at the end of processing.

The steps here are organized according to the idea of safety and post-processing. In practice, the specific model and system of the lathe can also be added or reduced to the operation process.

For more information about Shanghai Lathe Electromechanical Technology Co., Ltd. Shanghai lathe, Shanghai small CNC lathe, Shanghai CNC lathe, please contact Xiaobian.