How to change the CNC lathe chuck, generally use the following methods:

How to change the CNC lathe chuck

1. According to the status quo of the machine tool, the chucks of the type are confirmed: cylinder, pneumatic rotary cylinder, hydraulic rotary cylinder, etc.;

2. According to the shape of the lathe head to determine whether there is taper, there is no need to add a flange or buy the collet adapter with the manufacturer;

3. The taper of the front of the spindle is preferably standard, so that it is better to match the chuck;

4. Need to make a pull tube cooperation chuck and rotary cylinder to complete the clamping;

5. The rear part of the main shaft cooperates with the thread to make a flange to install the rotary cylinder. The lever type cylinder has more modifications and has certain requirements for the original structure of the machine tool.

6. Add signal contacts to the system Through the relay control solenoid valve to complete the programmable operation of the fixture, or through the installation of the foot switch to complete the semi-automatic clamping.

For more information about Shanghai Lathe Electromechanical Technology Co., Ltd. Shanghai lathe, Shanghai small CNC lathe, Shanghai CNC lathe, please contact Xiaobian.