The basic knowledge of the general requirements of CNC lathes is to look at the drawings, pick the tools, use the tools, and then the CNC programming. In detail, the requirements are as follows:

1. Will look at the drawings: the general textbooks are: "Mechanical map", "public service cooperation and measurement skills";

2. Will choose the tool: the base textbook has: "metal cutting principle and tool" "machine tool fixture";

3. Will use the gage: the textbook of the base is: "public service cooperation and skill measurement" "CNC processing technology";

4. Will be programmed: the basic teaching materials are: "CNC machine programming and operation" another download a simulation software, similar to programming learning;

The first thing to learn about CNC lathe programming is to remember the programming code, to understand the relevant instructions corresponding to each code, to understand the positive and negative of the coordinate system and direction of the lathe, and to know the use of cooperative tools such as: external knives, blocking knives, Drill bits, boring boring tools, milling cutters, thread knives, etc., it is not necessary to be clear about some simple accounting such as pitch, pitch, tooth depth, etc., multi-handed practice, learning CNC lathe programming is still too difficult.

For more information about Shanghai Lathe Electromechanical Technology Co., Ltd. Shanghai lathe, Shanghai small CNC lathe, Shanghai CNC lathe, please contact Xiaobian.