How to avoid the alarm on the CNC lathe mainly depends on the content of the alarm:

1. Overtravel alarm: from the operation surface, exempt the overtravel alarm from moving in the opposite direction, move the position of the hard limit switch, and move it back in the opposite direction;

2. Drive alarm: check the cause of the fault code according to the system driver manual;

3. Emergency stop alarm: the emergency stop switch is pressed, rotate the switch clockwise and press the reset button to cancel;

4. Chuck alarm: check the chuck in place signal, the general disk tray is relatively simple to present faults;

How to exempt the alarms The common alarm problems of CNC lathes are generally the above four conditions. If you can't remove them, you can contact the system manufacturer for consultation and exemption.

For more information about Shanghai Lathe Electromechanical Technology Co., Ltd. Shanghai lathe, Shanghai small CNC lathe, Shanghai CNC lathe, please contact Xiaobian.