The parking of small CNC lathes after braking is getting slower and slower. It is usually caused by the following conditions:

1. The small CNC lathe is generally equipped with a brake disc. When the brake disc is worn, this situation will occur. It can be removed or replaced.

2. The relay control time is too short. It can adjust the time relay time to some length but it can't be too long. If it is too long, it will burn the relay.

It is normal for the large-scale CNC lathe to stop after a few ten seconds of parking. The main reason is that the spindle inertia of the machine tool is relatively large, so it is not a problem of the CNC lathe.

For more information about Shanghai Lathe Electromechanical Technology Co., Ltd. Shanghai lathe, Shanghai small CNC lathe, Shanghai CNC lathe, please contact Xiaobian.